Marmon Ride Control (formerly DEA Products) has been a trusted manufacturer of engine and transmission mounts for over 30 years. Marmon Ride Control uses the highest quality of raw materials available, and thoroughly tests their products with state-of-the-art lab equipment to ensure that you’ll be installing a mount that will meet or exceed your original mount’s specifications.
Testing Includes:
Visual Inspection
Visual / Finish
Paint / Rubber Appearance
Weld Integrity
Dimensional Verification
Dimensions tested / approved using CMM (machine which takes readings in six degrees of freedom and displays these readings in mathematical form)
Elastomer / Durometer Tested
Rubber Hardness Check
Every shipment inspected thoroughly
Supplier verification on site
Rubber Tensile Strength tested
Strip sample and test of rubber processing
Supplier must submit test report and sample from every batch
On-site audits to verify process capabilities
Thermogravimetric Analysis
TGA / Rubber Compression Tests (changes in physical and chemical properties of mount materials are measured as a function of increasing temperature (with constant heating rate), or as a function of time (with constant temperature and/or constant mass loss))
Rheometer / Vulkameter tested (measure the way rubbers respond to applied forces)
Supplier must submit test report and sample from every batch
On-site audits to verify process capabilities
Ride Comfort may be important, but restoring a vehicle’s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restoring the vehicle’s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it.
That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Vehicle specific, hand assembled in house damping valves: The rebound and compression valves are the heart of a shock, they manage tire contact, steering response and control body movement. KYB assembles both the rebound and compression valves by hand, in a pressurized clean room to avoid contamination and make sure the valves control vehicle and tire movement as designed.
Fluid leaking can be a cause of shock failure. The KYB Excel-G has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear. The multi-lip, synthetic oil seal is also engineered to keep fluid in and has a wiper to keep contaminates out of the oil.
Proper wheel alignment is critical to vehicle performance, KYB utilizes the thickest and strongest bodies and brackets in the industry to increase rigidity. A sintered iron rod guide also helps to maintain correct alignment in all driving conditions.
Fluid must be managed through the valves for a shock to keep a vehicle operating as designed. The KYB Excel-G uses seamless, extruded steel tubing in the inner cylinders, and includes a Teflon band around the piston for a positive seal. This eliminates the chance of any fluid bypass and allows the valves to do their job and keep you in control
Ride Comfort may be important, but restoring a vehicle’€™s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicle’€™s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Ride Comfort may be important, but restoring a vehicle’s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restoring the vehicle’s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it.
That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Vehicle specific, hand assembled in house damping valves: The rebound and compression valves are the heart of a shock, they manage tire contact, steering response and control body movement. KYB assembles both the rebound and compression valves by hand, in a pressurized clean room to avoid contamination and make sure the valves control vehicle and tire movement as designed.
Fluid leaking can be a cause of shock failure. The KYB Excel-G has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear. The multi-lip, synthetic oil seal is also engineered to keep fluid in and has a wiper to keep contaminates out of the oil.
Proper wheel alignment is critical to vehicle performance, KYB utilizes the thickest and strongest bodies and brackets in the industry to increase rigidity. A sintered iron rod guide also helps to maintain correct alignment in all driving conditions.
Fluid must be managed through the valves for a shock to keep a vehicle operating as designed. The KYB Excel-G uses seamless, extruded steel tubing in the inner cylinders, and includes a Teflon band around the piston for a positive seal. This eliminates the chance of any fluid bypass and allows the valves to do their job and keep you in control.
KYB Excel-G shocks and struts are available for popular cars, trucks, SUVs and CUVs.
Ride Comfort may be important, but restoring a vehicle’s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restoring the vehicle’s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it.
That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Vehicle specific, hand assembled in house damping valves: The rebound and compression valves are the heart of a shock, they manage tire contact, steering response and control body movement. KYB assembles both the rebound and compression valves by hand, in a pressurized clean room to avoid contamination and make sure the valves control vehicle and tire movement as designed.
Fluid leaking can be a cause of shock failure. The KYB Excel-G has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear. The multi-lip, synthetic oil seal is also engineered to keep fluid in and has a wiper to keep contaminates out of the oil.
Proper wheel alignment is critical to vehicle performance, KYB utilizes the thickest and strongest bodies and brackets in the industry to increase rigidity. A sintered iron rod guide also helps to maintain correct alignment in all driving conditions.
Fluid must be managed through the valves for a shock to keep a vehicle operating as designed. The KYB Excel-G uses seamless, extruded steel tubing in the inner cylinders, and includes a Teflon band around the piston for a positive seal. This eliminates the chance of any fluid bypass and allows the valves to do their job and keep you in control.
KYB Excel-G shocks and struts are available for popular cars, trucks, SUVs and CUVs.
Ride Comfort may be important, but restoring a vehicle’s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restoring the vehicle’s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it.
That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Vehicle specific, hand assembled in house damping valves: The rebound and compression valves are the heart of a shock, they manage tire contact, steering response and control body movement. KYB assembles both the rebound and compression valves by hand, in a pressurized clean room to avoid contamination and make sure the valves control vehicle and tire movement as designed.
Fluid leaking can be a cause of shock failure. The KYB Excel-G has an ultra-smooth triple chrome plated chrome piston rod to reduce seal wear. The multi-lip, synthetic oil seal is also engineered to keep fluid in and has a wiper to keep contaminates out of the oil.
Proper wheel alignment is critical to vehicle performance, KYB utilizes the thickest and strongest bodies and brackets in the industry to increase rigidity. A sintered iron rod guide also helps to maintain correct alignment in all driving conditions.
Fluid must be managed through the valves for a shock to keep a vehicle operating as designed. The KYB Excel-G uses seamless, extruded steel tubing in the inner cylinders, and includes a Teflon band around the piston for a positive seal. This eliminates the chance of any fluid bypass and allows the valves to do their job and keep you in control.
KYB Excel-G shocks and struts are available for popular cars, trucks, SUVs and CUVs.
Ride Comfort may be important, but restoring a vehicle’€™s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicle’€™s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Ride Comfort may be important, but restoring a vehicle’€™s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicle’€™s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Ride Comfort may be important, but restoring a vehicle’€™s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicle’€™s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Ride Comfort may be important, but restoring a vehicle’€™s Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicle’€™s original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Showing 1–12 of 28 results
WhatsApp us